Before you call a single concrete contractor in the Dallas-Fort Worth area, you need to know one thing: what should this actually cost?

Concrete pricing in DFW is one of the most searched questions homeowners ask before any project — and for good reason. A driveway replacement, a backyard patio, a sport court, a foundation addition — these are significant investments, and walking into a quote conversation without a realistic number in your head leaves you dependent entirely on the contractor to set expectations.

This guide gives DFW homeowners a clear, honest, 2025-current picture of what concrete projects cost across Fort Worth, Keller, Southlake, Colleyville, and the surrounding Metroplex. Every project type, every finish option, every add-on cost — laid out so you can plan your budget, evaluate quotes intelligently, and make the right decision for your home.

How Concrete Is Priced in DFW

Before diving into specific project costs, it helps to understand how concrete contractors in the DFW area structure their pricing.

Per square foot. Most residential concrete projects in Fort Worth and surrounding areas are quoted per square foot of finished surface. This makes it easy to compare quotes and estimate costs as you adjust project dimensions.

What's included in per-square-foot pricing. A complete, honest quote from a DFW concrete contractor should include:

• Site preparation (excavation, grading, subgrade compaction)
• Gravel or crushed stone base installation
• Forming
• Concrete material and delivery
• Reinforcement (rebar or wire mesh)
• Finishing (broom, stamped, or other specified finish)
• Control joint placement
• Basic cleanup

What's typically quoted separately:

• Demolition and removal of existing concrete
• Specialized drainage work
• Permits
• Sealing (sometimes included, sometimes an add-on)

Always ask for an itemized written quote so you know exactly what's included and what isn't. Vague per-square-foot quotes without scope detail create room for surprises.

Per cubic yard. Ready-mix concrete itself is priced per cubic yard — currently ranging from $115 to $152 per cubic yard in the DFW area depending on mix design and delivery location. But for residential projects, you'll typically receive a per-square-foot quote that bundles concrete material cost into the overall price.

Concrete Driveway Cost in DFW (2025)

The driveway is the most common residential concrete project in Fort Worth and surrounding communities — and the one where pricing varies the most based on size, finish, and site conditions.

Standard broom finish driveway (reinforced with rebar):

• $6 to $11 per square foot in Fort Worth
• $6 to $11 per square foot in Keller and surrounding Tarrant County communities

Stamped or decorative concrete driveway:

• $11 to $18 per square foot for standard stamped patterns and single-color integral pigment
• $18 to $25+ per square foot for complex multi-color stamped designs with custom borders

Common driveway size cost estimates (Fort Worth / DFW, reinforced broom finish):

Driveway SizeSquare FootageEstimated Cost RangeSingle car (12 ft x 30 ft)360 sq ft$2,160 – $3,960Single car (12 ft x 40 ft)480 sq ft$2,880 – $5,280Two car (24 ft x 30 ft)720 sq ft$4,320 – $7,920Two car (24 ft x 40 ft)960 sq ft$5,760 – $10,560Two car (24 ft x 50 ft)1,200 sq ft$7,200 – $13,200

Add for demolition and removal of existing driveway: $1.10 to $1.80 per square foot on top of installation cost.

What drives driveway cost up in DFW:

• Larger dimensions — more material, more labor
• Decorative finishes (stamped, stained, colored) — more labor, higher material cost
• Steep slope or irregular shape — custom forming adds labor
• Demolition of existing concrete
• Tree root issues requiring extra excavation
• Site drainage work needed before pouring

What drives driveway cost down:

• Simple rectangular layout
• Broom finish only — no decorative treatment
• Fall or winter scheduling — sometimes better availability and pricing
• Bundling with adjacent flatwork (walkways, apron) on the same project visit

Concrete Patio Cost in DFW (2025)

Concrete patios are the second most common residential concrete project in the DFW area, and they carry a wider range of cost depending on finish choices than almost any other project type.

Basic broom finish concrete patio (reinforced):

• $8 to $13 per square foot in Fort Worth
• $8 to $13 per square foot in Keller and surrounding communities

Stamped concrete patio:

• $11 to $18 per square foot for reinforced stamped concrete in DFW
• Standard patterns (ashlar slate, cobblestone, flagstone): $11 to $15 per square foot
• Multi-color or border-detailed stamped designs: $15 to $20+ per square foot

Stained or colored concrete patio:

• $9 to $15 per square foot depending on stain type and application method

Exposed aggregate patio:

• $8 to $14 per square foot

Common patio size cost estimates (Fort Worth / DFW, reinforced broom finish):

Patio SizeSquare FootageEstimated Cost RangeSmall (10 ft x 12 ft)120 sq ft$960 – $1,560Mid-size (16 ft x 18 ft)288 sq ft$2,304 – $3,744Large (20 ft x 24 ft)480 sq ft$3,840 – $6,240Oversized (24 ft x 30 ft)720 sq ft$5,760 – $9,360

For stamped concrete patios, multiply the above by 1.4x to 1.6x to get approximate stamped cost ranges.

Average stamped concrete patio project cost in DFW: approximately $7,800 to $8,200 for a mid-size residential patio, based on market data from Fort Worth and Keller.

Concrete Flatwork Cost in DFW (2025)

Flatwork covers walkways, sidewalks, garage aprons, steps, and other horizontal concrete surfaces that aren't driveways or major patios.

Standard concrete walkway or sidewalk (broom finish, reinforced):

• $6 to $12 per square foot installed
• Average: $8 to $10 per square foot for most Fort Worth and DFW residential projects
• Per linear foot (for a standard 4-ft wide walk): $24 to $48 per linear foot

Common walkway project estimates:

• 50 ft front walkway (200 sq ft): $1,200 to $2,400
• 100 ft side yard path (400 sq ft): $2,400 to $4,800

Garage apron (standard, reinforced):

• $6 to $10 per square foot depending on thickness and site conditions
• Single-car garage apron (approx. 10 ft x 18 ft = 180 sq ft): $1,080 to $1,800
• Two-car garage apron (approx. 20 ft x 18 ft = 360 sq ft): $2,160 to $3,600

Concrete steps:

• $300 to $500 per step for standard poured concrete, depending on width and design complexity

Decorative walkways (stamped or stained):

• $10 to $20 per square foot depending on finish complexity

Pool Deck Concrete Cost in DFW (2025)

Pool decks are a specialized flatwork application — they need to be slip-resistant, heat-reflective, and built to handle constant water exposure in North Texas summers.

Broom finish pool deck (reinforced):

• $6 to $12 per square foot

Exposed aggregate pool deck:

• $8 to $14 per square foot — a popular choice for pool surrounds due to excellent grip and natural appearance

Stamped or stained pool deck:

• $12 to $20 per square foot depending on complexity

Common pool deck size estimates:

• Small pool deck (400 sq ft): $2,400 to $8,000 depending on finish
• Average pool deck (600 sq ft): $3,600 to $12,000 depending on finish
• Large pool deck (800 sq ft): $4,800 to $16,000 depending on finish

Sport Court Concrete Cost in DFW (2025)

Sport court slabs are a growing category across Fort Worth, Keller, Southlake, and surrounding DFW communities — particularly for backyard basketball and pickleball courts.

Concrete slab foundation (reinforced, appropriate for sport court application):

• $8 to $14 per square foot for the slab foundation

Common sport court slab cost estimates:

• Half-court basketball slab (approx. 47 ft x 50 ft = 2,350 sq ft): $18,800 to $32,900
• Full pickleball court slab (approx. 30 ft x 60 ft = 1,800 sq ft): $14,400 to $25,200
• Multi-sport combination slab: varies by total footprint and layout

All-in sport court costs (slab + surface coating + lines + equipment):

• Residential pickleball court, all-in: $25,000 to $45,000
• Half-court basketball, all-in (with hoop): $20,000 to $35,000
• Multi-sport court, all-in: $30,000 to $60,000+

Concrete Foundation and Foundation Addition Cost in DFW (2025)

Foundation work is priced differently from surface flatwork — it's an engineered pour with specific thickness, reinforcement, and subgrade requirements that reflect structural demands rather than aesthetic ones.

Residential concrete slab foundation (new build):

• $7 to $12 per square foot for standard residential slab-on-grade
• $10 to $20 per square foot for engineered or post-tensioned systems on challenging clay soil
• Total for a typical 2,000 sq ft footprint: $14,000 to $40,000 depending on engineering requirements and soil conditions

Foundation addition (room addition, garage, ADU):

• $10 to $20 per square foot for properly engineered addition foundations in DFW clay soil
• Additional costs: soil testing and engineering ($500 to $2,500), permits ($500 to $5,000), excavation

Concrete Repair and Overlay Cost in DFW (2025)

Not every concrete project requires a full replacement. Repair and overlay options can dramatically extend the life of structurally sound concrete at a fraction of new pour cost.

Concrete crack repair:

• Minor hairline crack sealing (DIY or professional): $0.10 to $0.15 per linear foot for crack filler
• Professional crack filling and joint resealing: $500 to $2,000 for most residential projects
• Panel replacement (cutting out and replacing individual sections): $6 to $14 per square foot

Concrete overlay / resurfacing:

• Basic overlay (plain or lightly textured): $3 to $7 per square foot
• Stained or colored overlay: $5 to $10 per square foot
• Stamped concrete overlay: $8 to $15 per square foot
• A complete driveway resurfacing typically costs $1,200 to $2,900 for a standard two-car driveway in the DFW area

Overlays are typically 30 to 50 percent less expensive than full replacement — and the right choice when the existing slab is structurally sound.

Commercial Concrete Parking Lot Cost in DFW (2025)

For business owners and commercial property managers in Fort Worth and surrounding DFW communities:

Standard commercial concrete parking lot:

• $4 to $7 per square foot installed for standard commercial application
• $6 to $10+ per square foot for heavy-duty commercial or industrial applications requiring thicker slabs and additional reinforcement

Common parking lot estimates:

• 10-car lot (~4,000 sq ft): $16,000 to $28,000
• 30-car lot (~12,000 sq ft): $48,000 to $84,000
• 50-car lot (~20,000 sq ft): $80,000 to $140,000

Add for:

• Subgrade stabilization for DFW clay: $1 to $3 per sq ft
• Demolition of existing paving: $1.50 to $3 per sq ft
• Striping and ADA compliance: $500 to $3,000 depending on lot size

What's NOT Included in Most DFW Concrete Quotes

Understanding what a quote typically excludes is as important as understanding the base price. Common add-ons that affect your total:

Demolition and haul-away: $1.10 to $2.00 per square foot for breaking up and removing existing concrete. This is almost always a separate line item — don't assume it's included unless it's explicitly stated.

Permits: Required for most new driveways, patio additions, foundations, and any commercial work in DFW municipalities. Expect $50 to $200 for residential projects, $500 to $5,000 for commercial.

Drainage improvements: If your site needs re-grading, French drains, or drainage corrections before the pour, this is typically quoted separately. Can range from a few hundred dollars to several thousand depending on the scope.

Sealing: Some contractors include an initial sealer application in their quote; others don't. Always ask. A quality sealer applied after 28-day curing is a recommended add-on if not included.

Site-specific challenges: Rocky subgrade, significant slope, difficult access for concrete trucks, or tree root complications can add $1 to $3 per square foot to base project costs.

5 Ways to Get the Best Value on Your DFW Concrete Project

1. Get three detailed, written quotes.The only way to know if a quote is fair is to compare it to others for the same scope. Require itemized written quotes — not ballpark figures — from at least three contractors before making a decision.

2. Schedule in fall or winter when possible.Spring and summer are peak season for concrete contractors in DFW. Fall (September through November) and mild winter windows often yield better contractor availability and occasionally more competitive pricing.

3. Bundle adjacent projects.If you need a driveway, walkway, and garage apron all done, doing them together is almost always less expensive per square foot than scheduling separately. The mobilization cost — crew, equipment, concrete delivery minimum — is spread across a larger project.

4. Choose your finish based on total value, not just upfront cost.A broom finish driveway at $8 per square foot and a stamped driveway at $14 per square foot have significantly different aesthetics and resale value implications. The stamped option costs more upfront but adds more curb appeal and property value in DFW's competitive real estate market — particularly in Keller, Southlake, and Colleyville neighborhoods where presentation matters.

5. Never choose the lowest bid without understanding why it's lowest.In concrete work, unusually low bids typically reflect cut subgrade preparation, thinner slabs, lighter reinforcement, or some combination of all three. In North Texas clay soil, these shortcuts translate directly to premature failure. The right question isn't "who is cheapest?" — it's "who delivers the best long-term value?"

Get a Free, Detailed Quote From CBD Concrete

CBD Concrete is a locally owned, family-operated concrete contractor serving Fort Worth, Keller, Southlake, Colleyville, and the greater Dallas-Fort Worth Metroplex. Owner Dane provides free, detailed, itemized quotes for every project — driveways, patios, sport courts, foundations, flatwork, commercial parking lots, and repair work.

Every CBD Concrete quote reflects exactly what the project scope requires — proper subgrade preparation, rebar reinforcement, appropriate concrete mix, and the finish you've chosen — with no hidden add-ons after the fact.

‍